What technology is the DAS Energy module based on?

The technology used was developed by the Austrian photovoltaic manufacturer DAS Energy in Wiener Neustadt and essentially consists of the proprietary fiber-reinforced plastic core (prepreg). This layer is located above and below the cell and is mainly responsible for the flexibility and stability of the DAS Energy module. Monocrystalline cells are used. Further information on request.

What mounting options are available for the DAS Energy PV modules?

DAS Energy modules can be glued to a smooth surface. The modules can also be attached using magnets and quick-release systems, as with the DAS Energy balcony power plant. With the golf cart PV roof, the module is attached to the roof of the golf cart using double-sided adhesive tape and screws.

How must the adhesive beads be aligned when installing the modules?

The modules can be mounted horizontally or vertically mounted horizontally or vertically. In any case, the adhesive beads must must always be applied in the direction of water flow.

How does a DAS Energy PV module react to shading?

As with conventional modules, shading should be avoided. Should shading nevertheless occur, all modules have bypass diodes that disconnect the shaded parts of the module to minimize yield losses. Shading should be avoided at all costs with balcony power plants, as the module will not provide any power if it is shaded. Before purchasing a balcony power plant, it is therefore essential to check whether shading (e.g. from trees, house walls, etc.) could affect the performance of the module.

What if I don't like the product or it doesn't fit?

The purchased modules can be returned in their original packaging within 14 days at your own expense or directly to the store upon presentation of the original invoice receipt. Refunds will normally be made within one week .

Which countries do we ship to?

Austria & Germany For inquiries about deliveries to other EU countries, please contact us at office@daskraftwerk-pv.com.

How quickly can we deliver?

If our modules are in stock, we deliver within 3-5 days. If the modules are not in stock, it usually takes a little longer - we are happy to provide information about current delivery times on our website and on request.

HYBRID module 11x6 330Wp

Description

The best of both worlds - With a weight of just 6.85 kg/m², the Hybrid Module 11×6 remains particularly light and is ideal for roofs with a lower load-bearing capacity. It offers a wide range of application options: direct bonding to trapezoidal sheet metal systems, installation on flat roofs (bitumen or membrane) and on façades.

The HYBRID 11×6 module has 66 monocrystalline silicon cells and offers an output of 330 watts peak (Wp). The junction box is located on the front of the module in the middle. With this module, specially developed for large roof surfaces in industrial and commercial areas, you get an optimum combination of economy, performance and easy handling. This module is particularly suitable for trapezoidal sheet metal roofs.

Our HYBRID module 11x6M, developed by DAS Energy for large-scale photovoltaic projects, offers additional benefits. Thanks to our innovative bonding system, installation time can be significantly reduced, enabling large roof areas to be converted into energy sources quickly and easily.

The technology used was developed and patented by DAS Energy in Austria. It essentially consists of the proprietary fiber-reinforced plastic core (prepreg). The special feature of the HYBRID 11×6 module is the thin glass layer. The unique combination of the proprietary fiber-reinforced plastic core and the glass layer ensures that the modules are significantly lighter and thinner than conventional solar modules.

Downloads

Hybrid-Glass 11×6 data sheet (PDF)
Installation instructions DAS Energy Module DE (PDF)
Installation instructions DAS Energy Module EN (PDF)